Front stash pocket lined in Nilex, 7.5" deep, #8 YKK RC zippers
Front organizer compartment, #8 YKK RC zippers:
Rear document sleeve
Top organizer (revised Evade design) with padded phone pocket (holds up to iPhone 13 Max), 2 pen slots, 1 light / multitool slot, card holders, rear zippered pocket
Two bottom elastic pleated pockets
Compartment is entire height of backpack, 1" deep and unzips half way down
Main compartment, #10 YKK RC zippers, 5" deep:
Front wall, Top zippered pocket in matching lining fabric, 7" deep
Front wall, Bottom zippered mesh pocket, 5" deep
Rear wall, Suspended & padded slim laptop sleeve for up to a 16" MBP
Padded tablet sleeve in front of the laptop sleeve
Top carry handle
Quick access zippered opening (behind carry handle) with #8 YKK RC zippers to get to your laptop & tablet
Adjustable sternum straps
Padded mesh back
Luggage (handle) pass through
Padded shoulder strap harness (new design)
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
The Whitley will be available in the following fabric / color options:
Front stash pocket lined in Nilex, 7.5" deep, #8 YKK RC zippers
Front organizer compartment, #8 YKK RC zippers:
Rear document sleeve
Top organizer (revised Evade design) with padded phone pocket (holds up to iPhone 13 Max), 2 pen slots, 1 light / multitool slot, card holders, rear zippered pocket
Two bottom elastic pleated pockets
Compartment is entire height of backpack, 1" deep and unzips half way down
Main compartment, #10 YKK RC zippers, 5" deep:
Front wall, Top zippered pocket in matching lining fabric, 7" deep
Front wall, Bottom zippered mesh pocket, 5" deep
Rear wall, Suspended & padded slim laptop sleeve for up to a 16" MBP
Padded tablet sleeve in front of the laptop sleeve
Top carry handle
Quick access zippered opening (behind carry handle) with #8 YKK RC zippers to get to your laptop & tablet
Adjustable sternum straps
Padded mesh back
Padded shoulder strap harness (new design)
Alpha One Niner, CHIO-X, X42 Black
Regular price
$148.00
Save $-148.00
/
It goes without saying that here at AON, we are big proponents of the backpack. But sometimes, we need or prefer a smaller bag to conveniently carry our basic essentials that we use and need access to throughout the day. After almost 6 months of rigorous testing and evaluation, we are proud to announce the latest generation of our beloved Chio bag: the Chio-X! This bag was designed with convenience and versatility in mind, ensuring that you can take all your essentials with you wherever you go.
A YouTube video by PK Shiu has been added under 'Video Reviews'!
Story behind the original CHIO:
We designed the Chio bag to hold the basic essentials, and I carry what is shown in the video here. These items I carry daily, regardless of whether I'm back home, traveling stateside or internationally. I simply add or remove additional items depending on where I'm going and how long I'm going to be there. For domestic and international travel, I keep the Chio bag below the front seat on a flight, and keep everything else in my backpack in the luggage bins above. This is especially useful on long flights when the lights are out, and I don't want to rummage through my backpack in the bin.
Finally, for those photographers among us, I would like to also mention the availability of the optional Chio camera pouch add-on. This well-padded pouch has a hook bottom that helps secure it to the bottom of the Chio where you will find a corresponding inline strip of loop. Not only is this pouch a great addition to your Chio bag, it also doubles as a stand-alone bag with its own shoulder strap. In a quick instance, you can easily convert your Chio into a small camera bag, perfect for capturing those special moments........Helm @ AON
Available only in Dimension Polyant's X42 Black.
Inside zippered pocket and lining in red 210D nylon ripstop.
1050D ballistic nylon base (bottom of Chio)
Dimensions 13" (w) x 10" (H) x 3.5" (D)
Volume approximately 9 liters / 550 cu2 (not including side Tweave pockets)
Weight approximately 1.2 pounds (0.55 kg)
A total of 6 (six) zippered pockets; 2 in front, 3 in rear and the main compartment.
Two (20 internal sleeve pockets on the front wall of main compartment.
One (1) suspended zippered pocket on the rear wall of the main compartment.
Rear zippered pocket concealed/covert compartment - internal side mounting points for optional organizer
Dual adjustable Shoulder Straps (4-panel webbing)
Side pleated Tweave pockets for small water bottles, quick stash, etc,
#10 Reverse YKK zipper for main compartment and #8 for all other zippered pockets.
One (1) internal circular d-ring on each end.
BOGear x Alpha One Niner Collab, SPARE CAMEL 2.0
Regular price
$400.00
Save $-400.00
/
Vitals:
Dimension - 20.5” H x 12.5” W x 6.75” D ( 520 x 320 x 195 mm)
Weight - 3.9 lbs (1.77 kg), pack without organizer
Volume - approximately 30L
Exterior Fabric - Dimension-Polyant’s X50 Tactical (currently BLACK only)
Exterior laser cut PALS panel is Brookwood's Squadron fabric
Interior Lining - 210D Ripstop Nylon (Orange)
WooJin hardware - shoulder straps (buckles, web adjuster, slider and webbing roller/organizer), side compression straps, sternum strap
17337 Webbing
Main Compartment:
#10 YKK RC zippers
3 mesh zippered pockets on the front wall
Pleated sleeve on the back wall, 14.75" tall (375 mm)
Laptop Compartment:
Clamshell opening, #10 YKK RC zippers
Loop patch for Type 1 or Type 2 organizer on the front wall
Document sleeve behind loop patch
2 Tweave pockets below loop patch
Padded laptop sleeve with pleated sides and bottom, with magnetic closure, and will fit laptops up to 15.5" wide x 11.5" deep and 1" thick (394 x 292 x 25 mm)
Padded tablet sleeve
Other Details:
Front loop patch, 9.5" x 1.75" (241 x 44 mm)
Front zippered (#8 YKK RC) pocket hidden behind the loop patch, 9.75" (W) base tapers to 7" top x 6" H (241 -> 178 x 152 mm)
Double side removable compression straps with WooJin buckle with secondary mounting point (front or rear of laptop compartment)
Padded mesh back
Padded Hip Belt - same design as our current ones for the Evade except this is in X50 Tactical.
Beavertail - this is a different design specifically for the SC2.0 and it is in 500D.
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and locally.
Dimension - 20.5” H x 12.5” W x 7.5” D (520 x 320 x 195 mm)
Weight - 3.9 lbs (1.77 kg)
Volume - approximately 30L
Exterior Fabric - Dimension-Polyant’s X50 Tactical (currently BLACK only)
Exterior laser cut PALS panel is Brookwood's Squadron fabric
Interior Lining - 210D Ripstop Nylon (Orange)
WooJin hardware - shoulder straps (buckles, web adjuster, slider and webbing roller/organizer), side compression straps, sternum strap
17337 Webbing
Main Compartment:
#10 YKK RC zippers
3 mesh zippered pockets on the front wall
Pleated sleeve on the back wall, 14.75" tall (375 mm)
Laptop Compartment:
Clamshell opening, #10 YKK RC zippers
Loop patch for Type 1 or Type 2 organizer on the front wall
Document sleeve behind loop patch
2 Tweave pockets below loop patch
Padded laptop sleeve with pleated sides and bottom, with magnetic closure, and will fit laptops up to 15.5" wide x 11.5" deep and 1" thick (394 x 292 x 25 mm)
Padded tablet sleeve
Other Details:
Front loop patch, 9.5" x 1.75" (241 x 44 mm)
Front zippered (#8 YKK RC) pocket hidden behind the loop patch, 9.75" (W) base tapers to 7" top x 6" H (241 -> 178 x 152 mm)
Double side removable compression straps with WooJin buckle with secondary mounting point (front or rear of laptop compartment)
Padded mesh back
Alpha One Niner, Unipanel Trucker Mesh Fitted Cap, Embroidered
Regular price
$27.00
Save $-27.00
/
A FlexFit unipanel trucker mesh fitted cap in melange dark grey with our new AON logo!
Trucker cap with elastic mesh panels
Fused front panel
Closed back. Stretch fitted
Silver undervisor, 8-rows of stitching on visor
CONTENTS Melange Colorways: 97% Polyester / 3% PU Spandex