BLACK FRIDAY

• Hook back organizers in 210D nylon.
• These are 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx) so they fit into the rear zippered pocket of our CHIO bags
• These are also used as the primary organizer on the EVADE 1.5 and Pathfinders
• Or can be used as a stand-alone, mounted onto a panel of loop.

Type 01 - is without the elastic webbing

Type 02 - is with the elastic webbing

Our Matroskya pouches are named after the Russian nesting dolls of old and designed for the Recon 9 EVADE, Evade 2.0 and now the new Evade 1.5 backpacks. Each set comes with four differently sized pouches, each nested inside the other.

It is currently available in:

• Black
• Red
• Blue
• Clear PVC

Each pouch has 2 (two) zippered compartments; a vertical in front and a horizontal in the rear.

Each pouch is easily mounted by slotting the top 1" rectangular buckle (what we call a hanger) into any PALS webbing setup (what some call a MOLLE panel) or a d-ring of appropriate size so as to hold it in place.

Dimensions of the largest to smallest as follows:

• 15" x 10.75"
• 12" x 8.75"
• 9.5" x 7.75"
• 7.5" x 5.5"

The largest 2 (two) pouches has 2 (two) hangers and the smallest 2 (two) have only 1 (one) each. These pouches are extremely versatile can be used to hold anything from IFAKs, toiletries to a change of clothing.

• Hook back organizers in 210D nylon.
• These are 7” W x 4.5” H (17.8 cm x 11.4 cm approx)
• Can be used as a stand-alone, mounted onto a panel of loop.
• A miniaturized version of our standard Type 02

Please note that these Kits are loop and hook mounted.

A hook & loop removable wrap Holster plus three (3) accessory holders. The wrap Holster is made out of two (2) layers of milspec elastic webbing compared to the single layer that is found in other holsters. The accessory holders are also double layered and can hold a variety of items from double magazines (1 each), single stacks (2 in each), flashlights to multi-tools, etc.

The wrap holster is sized to be able to hold everything from BUGs and J-frame revolvers to Government model 1911s. This holster will also fit a full size pistol with a light as shown in one of the photos; a full size M&P with an X300 mounted.

We've also tested the holster to hold other accessories including an external wireless hard drive!

It goes without saying that here at AON, we are big proponents of the backpack. But sometimes, we need or prefer a smaller bag to conveniently carry our basic essentials that we use and need access to throughout the day. After almost 6 months of rigorous testing and evaluation, we are proud to announce the latest generation of our beloved Chio bag: the Chio-X! This bag was designed with convenience and versatility in mind, ensuring that you can take all your essentials with you wherever you go.

 NOTE: The new Chio Organizer is sold separately.

A YouTube video by PK Shiu has been added under 'Video Reviews'!

Story behind the original CHIO:

We designed the Chio bag to hold the basic essentials, and I carry what is shown in the video here. These items I carry daily, regardless of whether I'm back home, traveling stateside or internationally. I simply add or remove additional items depending on where I'm going and how long I'm going to be there. For domestic and international travel, I keep the Chio bag below the front seat on a flight, and keep everything else in my backpack in the luggage bins above. This is especially useful on long flights when the lights are out, and I don't want to rummage through my backpack in the bin.

Finally, for those photographers among us, I would like to also mention the availability of the optional Chio camera pouch add-on. This well-padded pouch has a hook bottom that helps secure it to the bottom of the Chio where you will find a corresponding inline strip of loop. Not only is this pouch a great addition to your Chio bag, it also doubles as a stand-alone bag with its own shoulder strap. In a quick instance, you can easily convert your Chio into a small camera bag, perfect for capturing those special moments........Helm @ AON

Our packing cube set of 3 comprises of the following:

• Large, 14” x 9.75” x 4”, compression

• Medium, 10 x 7.5” x 3.5”, compression

• Small, 11” x 4.5” x 2’, non-compression

  
  

MATERIALS:

• 210D Ripstop Nylon

• Darlington Mesh

• #18 RC YKK Zippers

• WooJin Zipper Pulls

• 17337 Webbing Handle

A carry-on TSA compliant toiletry kit. Gone will be the days of using zip lock bags. The next time you check-in at TSA security, all you have to do is place this T-Kit in the bin and collect it after pronto. So easy.

• Dimension: 9" (W) x 5.75" (H) x 2.25" (D) / 22.9 cm x 14.5 cm x 5.7 cm
• Materials: These are available in PVC and Dimension-Polyant's ODL04 laminate

You can also use these t-kits as a cable organizer, a med kit and keep all your GoPro accessories in one!

We've also personally tested this t-kit in Japan, Singapore, Malaysia, Vietnam, Indonesia, Germany, Belgium and Thailand sans any issues. That said, please note that one customer did have a problem while going through British security. He was asked to empty all into zip lock bags.

A video of a quick leak test we did with this Kit:

Introducing the SLIDER, our latest organizer variant, developed as a result of request from many who are looking for our standard organizers for packs and bags that lack organization. Designed with the same setup and dimensions as our popular Type 01 and 02 organizers, the SLIDER is stiffer.

What sets the SLIDER apart is its unique webbing handle, which allows you to easily move it from one slip pocket to another on your backpack or bag. Unlike our standard organizers, the SLIDER does not come with any hook in the rear or clips.

With the SLIDER, you can keep your EDC gear organized and easily accessible in any slip pocket that is large enough to accommodate it. Upgrade your EDC game with the SLIDER today!

These Sliders are available in both our Type 01 or 02 (with the elastic webbing) configuration.

• Material, 210D nylon ripstop.
• Available in red, orange and black.
• These are 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx) 

Vitals:

• Dimension - 20.5” H x 12.5” W x 6.75” D ( 520 x 320 x 195 mm)
• Weight - 3.9 lbs (1.77 kg), pack without organizer
• Volume - approximately 30L
• Exterior Fabric - Dimension-Polyant’s X50 Tactical (currently BLACK only)
• Exterior laser cut PALS panel is Brookwood's Squadron fabric
• Interior Lining - 210D Ripstop Nylon (Orange)
• WooJin hardware - shoulder straps (buckles, web adjuster, slider and webbing roller/organizer), side compression straps, sternum strap
• 17337 Webbing 

Main Compartment:

• #10 YKK RC zippers
• 3 mesh zippered pockets on the front wall
• Pleated sleeve on the back wall, 14.75" tall (375 mm)
  

Laptop Compartment:

• Clamshell opening, #10 YKK RC zippers
• Loop patch for Type 1 or Type 2 organizer on the front wall
• Document sleeve behind loop patch
• 2 Tweave pockets below loop patch
• Padded laptop sleeve with pleated sides and bottom, with magnetic closure, and will fit laptops up to 15.5" wide x 11.5" deep and 1" thick (394 x 292 x 25 mm)
• Padded tablet sleeve

Other Details:

• Front loop patch, 9.5" x 1.75" (241 x 44 mm)
• Front zippered (#8 YKK RC) pocket hidden behind the loop patch, 9.75" (W) base tapers to 7" top x 6" H (241 -> 178 x 152 mm)
• Double side removable compression straps with WooJin buckle with secondary mounting point (front or rear of laptop compartment)
• Padded mesh back
• Padded Hip Belt - same design as our current ones for the Evade except this is in X50 Tactical.
• Beavertail - this is a different design specifically for the SC2.0 and it is in 500D.

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and locally.

Remember, when in doubt about any of this, please contact us directly!

Thanks!

It all started with personal shoe bags I have that don't fit any of my Salomons, Lowas, Vasques, Zamberlans or any of my chukka or desert boots. These easily fit up to a size 13 and some 14s.

Constructed out of 210D Ripstop Nylon (Coyote Brown, Black and Orange), dual #8 YKK reversible zippers, mesh and WooJin molded pulls. Plus a close cell foam padded base.

Photos show examples of selected boots and corresponding sizes of each pair.

Dimensions of each boot bag is 13" x 9.5" 5"

WEEKENDER Duffel

Introducing the enhanced and upgraded version of our renowned Recon 6 duffel bag – the ultimate companion for your journeys! Crafted to meet rigorous mil-spec standards for exceptional durability and designed with a focus on simplicity, this bag is built to exceed your expectations.

Unzipping the robust #10 YKK zippers reveals a meticulously organized interior. On one side, you'll find two generously sized open top stretch sleeve pockets, perfect for effortlessly organizing your belongings. On the opposite side, there is an additional sleeve pocket featuring a convenient webbing hook and loop closure, specifically designed to securely hold a tablet or similar device. Rest assured, all your essentials will find their rightful place within the spacious main compartment, regardless of the nature of your gear.

As with all our meticulously crafted bags, the WEEKENDER showcases our new distinctive touch. This latest edition boasts two front pockets, both thoughtfully padded to ensure the safety of your belongings. In this revised version, we have adorned the flap covers of these pockets with exquisite full-grain leather, elevating both the style and functionality of the bag. The magnetic closure adds an extra layer of convenience, ensuring quick and easy access to your essentials while maintaining a sleek and sophisticated appearance.

Whether you're embarking on a weekend getaway or an adventurous expedition, the new and improved WEEKENDER is engineered to accompany you every step of the way. Experience the epitome of quality, design, and versatility with this remarkable duffel bag.

Upgrade to the new WEEKENDER and unlock limitless possibilities for your travels.

FEATURES & BENEFITS

• Exterior made of Dimension-Polyant's Black X50 and 1050D Ballistic Nylon Black
• Genuine #10 & #8 YKK zippers with leather pulls
• Custom metal hardware
• Two (2) padded Front Pockets with double magnetic flaps, and a quick stash sleeve behind each  pocket
• Removable nylon shoulder straps with leather pads
• Dual layer reinforced handles in multi-column webbing with leather wrap handles
• UltraGrid Dark Chili nylon lined interior
• Shoulder straps that are adjustable on the go
• Fully taped seams

SPECIFICATIONS

• Exterior dimensions - 22.5" (Width) x 10.5" (Height), and it tapers from a base of 9.5" to 7.5" at the top (cross section)( 57cm x 27cm x 24 to 19cm )
• Weight - 2.9 pounds ( 1.31 kilo )
• ASTM Measured Capacity - 36 liters / 2200 cu in

 A FlexFit unipanel trucker mesh fitted cap in melange dark grey with our new AON logo!

• Trucker cap with elastic mesh panels
• Fused front panel
• Closed back. Stretch fitted
• Silver undervisor, 8-rows of stitching on visor

• CONTENTS Melange Colorways: 97% Polyester / 3% PU Spandex
• SIZES:
• S/M (6 3/4” - 7 1/4”)
• L/XL (7 1/8” - 7 5/8”)
• PROFILE Mid
• VISOR Curved
• PANELS 5
• CROWN 3 ½" High

An in-house Alpha One Niner design, our Baguette Hauler is made from Challenge Sailcloth UltraGrid, the world’s first recycled nylon grid fabric with Ultra ripstop.

Challenge Sailcloth has taken a classic fabric to the next level with higher performance and lower environmental impact.  UltraGrid is woven with 210d recycled nylon yarn from pre-consumer industrial waste.  A double 200d Ultra grid provides exceptional tear-strength and visual impact.

This unique double Ultra grid reduces weight and doubles tear strength and has a tensile strength 15x stronger than steel.

The Baguette Hauler is currently only available in the following fabric / color option:

• UltraGrid, Black

 Current VITALS:

• Dimensions, unpacked - 16" (H) x 13" (W) x 5" (D) (40 x 33 x 12.5 cm)
• Dimensions, packed - 7" (W) x 10" (W) x 1" (D) (25.5 x 18 x 0.25 cm)
• Weight, 9.3 oz (264g)
• Volume, 17L 
• Carry Handles, Long - 25"
• Grab Handles, Short - 10.5"

FEATURES:

• Multi column webbing handles and front daisy chain loops 

• Two carry handles sets

• Front loop patch

• Inner hanging zippered pouch with YKK coil zipper

• YKK Mil-spec brass snap center of the tote opening
  

• All internal seams are piped.

Will fit a 4" x 6" flip up vertical opening notebook on the inside right side including the top spiral Rite-in-the-Rain notebooks:

• Field wallet is 8.25" (H) x 5.5" (W) x 0.75" (T)
• Front loop patch is 4.75" (W) x 2.75" (H)
  
• 5 credit card sized pockets on the inside left.
  
• Large sleeve pocket behind the credit card sized pockets.
• The rear of the wallet features a 7 x 3.75" zippered mesh pocket to securely hold small contents.
• Inside right has 6.25" x 4.5" clear lexan area for marking over and/or to hold vertical opening notebook.
• Dual YKK #8 reverse coil zippers.
• Loop along the inside spine of the field wallet.

*Does not include Rite-in-Rain notebook in photo.

Product dimensions:

• When closed 8.25" (H) x 5.5" (W) x 0.75" (T)
• When open 8.25" (H) x 11.5" (W)
• Weight: 3.5 oz

Our hand-made leather watch rolls are carefully designed to carry 3 watches for your travels. This traditional design lies flat when open, and it rolls up into a compact kit, perfect when packing space is a premium. Simply place your watches in the slots, fold the leather flap over, roll, and secure the roll with the leather cord.

Each roll is hand-stitched and therefore is unique, and can vary slightly in color and dimensions.

FEATURES:

• A combination of Japanese and Italian leather
• Holds 3 x watches, 2 x straps and 1 x watch band spring bar tool
• Fastens with matching leather cord

DIMENSIONS:

• Each roll is 11.75" x 6.75" (300mm x 170mm) when laying flat.
• First watch slot is 2.75" wide (69mm) and the other two are 2.5" wide (65mm)
• Strap slots are 1.5" (37mm)

Nylon Flyer's / CCW Belt with National Molding (Duraflex) Buckle

These belts are from our parent brand, SERT. SERT focuses primary on law enforcement, military and concealed carry products.

For proper use, the loose end must be threaded through the Duraflex buckle and around the locking bar.  Fasten securely with the hook and loop. Please note buckle is NOT load bearing.

This belt is designed as a pants belt to be worn for for frequent fliers and pistol carry (CCW), pistol training, pistol competition (IDPA, USPSA, IPSC).  It should not be used as an emergency belt nor should it be used for rappelling.

• Currently available in Black, Coyote Brown and Wolf Gray.
• Width 1.5"
• Made out of 100% Nylon webbing.
• These belts are all 5-stitch.
• Plastic insert between two pieces of webbing to harden the walls of belt.
• One price for all sizes.

• Small - 28" to 31"
• Medium - 31" to 35"
• Large - 35" to 39"
• XL - 39" to 43"
• 2XL - 42" to 46"
• 3XL - 47" to 50"
• 4XL - 51" to 55"

• Please ADD 1" to your belt size for those who carry OWB, add 2" for those carry IWB or Appendix.