UPDATE May 1st: Selected fabric / color combinations are currently in stock. If one is not in stock you may select that option and chose to be notified via email when it becomes available.
If you have ANY questions about this, please reach out to us HERE.
NOTE:Our EVADE backpacks are built with some heft and as a result the Full (version) packs weigh 4.0 lbs or more depending on your fabric choice. So BEFORE you place an order, please be aware of this.
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
500D Solids incl Black, Ranger Green, Multicam Black, Wolf Gray
420D Diamond Ripstop Black, Gray, Med Navy and 2-Tone
1050D Ballistic Nylon Black
Lining is 210D Gray Ripstop Nylon.
Dimensions 19" (H) x 12" (W)(at base, tapers to 9" top)
Depth (measured from front to back at the base) of EV1.5 is 7".
Inside the main compartment it is 5.5" deep for the EV1.5.
The current weight of the Full 500D is 4.4 lbs (2.00 kg).
The current weight of the Full 420D is 4.0 lbs (1.82 kg).
The current weight of the Full 1050D is 4.88 lbs (2.22 kg).
Volume approximately 25 L.
Four (4) compartments for the EV1.5 Full:
Main version (not Lite) - A back dedicated laptop compartment (with a well padded base) that will fit up to a 15" laptop, and sleeves for your tablet and periodicals.
A middle main compartment that includes:
Two (2) zippered mesh pockets on the front wall
And a full rear wall PALS loop.
Front organizer compartment that features
1 mesh zippered pocket on the front wall
A loop velcro back wall for front organizer panel - Type 01 (no elastic) or Type 2 (with elastic).
Key lanyard with dual d-ring locations.
And a rear concealed/covert compartment lined with Velcro loops - use a V-Kit for off body CCW or slip an ultrabook or tablet in there. The zippered access (both sides) is approximately 12.5” and the compartment is approximately 18” H x 10” W.
Well padded mesh back with a luggage handle pass through along the air channel.
Top front EDC / Quick Access Pocket lined with Nilex.
Padded Sewn-In Adjustable Shoulder Straps with Load Lifters.
Side Elastic Pods (pouches)
Padded tubular webbing carry handle
Adjustable chest strap
Double side removable compression straps
Removable shock cord on front of pack.
Heavy duty WooJin hardware
D-Ring loops/hangers in the main compartment and the front organizer to accept Matroskya pouches.
#8 Reverse YKK zippers
Matching pack fabric hook velcro patch for the front loop panel.
Removable buckled 1" straps at the bottom of the pack.
Each Evade 1.5 comes with one organizer, and right now we are shipping it with the Type 1 organizer.
WooJin hardware - shoulder straps (buckles, web adjuster, slider and webbing roller/organizer), side compression straps
Fidlock V-buckle - sternum strap
17337 Webbing
Each Pathfinder INCLUDES a Type 1 Organizer
Main Compartment:
#10 YKK RC zippers
2 vertical columns of loop on the back wall, will accept the Evade PALS Panel
2 mesh zippered pockets on the front wall
2 mesh zippered pockets on the sides
Reinforced buttonholes for cable pass through into external side zippered pockets
Laptop Compartment:
Clamshell opening, #10 YKK RC zippers
Loop patch for Type 1 or Type 2 organizer (front wall)
Document sleeve behind loop patch
2 elastic mesh pockets below loop patch
Padded laptop sleeve with pleated sides and bottom, with magnetic closure, and will fit laptops up to 15" wide x 10.75" deep and 1" thick.
Padded tablet sleeve
Other Details:
Front zippered (#8 RC) pocket, ambidextrous access (pass through), with loop rear wall
Front (top) quick access zippered (#8 RC) pocket lined with Nilex
Zippered (#8 RC) side pockets with 2 sleeves and a cable pass through (to main compartment)
Flat elastic side water bottle pockets, large enough to hold a Nalgene
Single side compression strap with WooJin magnetic buckle
Padded mesh back with luggage pass through in the middle channel
CDH-Tac x A19 Collaboration Compact Card Wallet
Regular price
£29.00
Save £-29.00
/
NOTE: These are inbound and will start shipping at the end of March, thanks.
A new collaboration with our dear friends at CDH-Tac Finland. This new laser cut compact folding card wallet was designed & developed by CDH and produced by us in the selected color combos using 500D + 500D Squadron laminate from Brookwood and our own custom orange laminate.
Dimensions (closed) - 4" x 2.6" (10.3 x 6.7 cm) Thickness with 6 cards: 0.36" (0.9 cm)
This wallet holds up to 6 cards (2 singles outside and 2 double inner pockets) plus a bill holder on each side.
If you are planning to use this as business card holder, it will easily hold 30 cards.
PRE-ORDER: Alpha One Niner, WHITLEY Backpack
Regular price
£162.00
Save £-162.00
/
Please READ ALL the notes before participating in this pre-order for the WHITLEY backpack and if you have ANY questions about this, please reach out to us HERE.
No pre-payment nor deposit is required for the pre-order. All we ask is that you honor your pre-order when the time comes to finalize the purchase. Invoices will be emailed about 3 weeks out from start of fulfillment. We are aiming for end July delivery BUT this is an ESTIMATE and it may change.
If for any reason you're among the 'lucky' few that end up on the payment page and you decide to pre-pay for yours, well bless you. Otherwise let us know and we will sort it out for you. This has happened before, no app is 100% perfect.
When the time comes for the invoices, we will post a notice online. There has been several occasions when our invoices have end up in spam folders so if at all possible, please whitelist our email address.
All updates will be provided on our FB/IG pages and via email as we usually do. Please check our FB/IG page before emailing us for updates. When in doubt, come back to this page and read everything again.
When a pre-order is placed you will receive an immediate notification from the store. If you don’t receive one please send us an email HERE and we will check to make sure your pre-order is in. Most of the times these emails are sitting in your spam box / folder please check there first.
If you need to change your order, please email us versus canceling it and placing a new order. We can manually edit your order.
These pre-orders may arrive in batches so some ship out earlier than others. Please keep this in mind.
All international orders - please note that we are NOT responsible for all import duties or taxes or brokerage fees that you may incur for importing a Whitley.
If you chose USPS Priority Mail for shipping, the 2-3 days delivery is an estimate and NOT a guarantee.
For those in Asia, EDC&G in Singapore will be launching the drop simultaneously.
And finally.....we do not have photos of the other Whitleys (ballistic nylon, 500D black and MCB) up just yet and will not have any in time for the drop. We will share these as soon as we can. So if you pre-ordered one in MCB (for example) and don't like how it looks when the photo is up, feel free to change it or cancel your order. Let's keep it simple.
Thanks all for participating and we hope the Whitley is every thing you expect of it when you get yours!
The Whitley will be available in the following fabric / color options:
X-Pac VX42
500D Black
500D Multicam Black
1050D Ballistic Nylon, Black
Lining in 210D ripstop orange
Current VITALS:
Dimensions, 18.5" (H) x 11" (W) x 6" (D)
Weight, 3.4 lbs (VX42)
Volume, 20L
FEATURES:
Front stash pocket lined in Nilex, 7.5" deep, #8 YKK RC zippers
Front organizer compartment, #8 YKK RC zippers:
Rear document sleeve
Top organizer (revised Evade design) with padded phone pocket (holds up to iPhone 13 Max), 2 pen slots, 1 light / multitool slot, card holders, rear zippered pocket
Two bottom elastic pleated pockets
Compartment is entire height of backpack, 1" deep and unzips half way down
Main compartment, #10 YKK RC zippers, 5" deep:
Front wall, Top zippered pocket in matching lining fabric, 7" deep
Front wall, Bottom zippered mesh pocket, 5" deep
Rear wall, Suspended & padded slim laptop sleeve for up to a 16" MBP
Padded tablet sleeve in front of the laptop sleeve
Top carry handle
Quick access zippered opening (behind carry handle) with #8 YKK RC zippers to get to your laptop & tablet
Adjustable sternum straps
Padded mesh back
Padded shoulder strap harness (new design)
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.