Accessories

• Hook back organizers in 210D nylon.
• These are 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx) so they fit into the rear zippered pocket of our CHIO bags
• These are also used as the primary organizer on the EVADE 1.5 and Pathfinders
• Or can be used as a stand-alone, mounted onto a panel of loop.

Type 01 - is without the elastic webbing

Type 02 - is with the elastic webbing

• Detachable Tactical Mesh Pouches can be deployed anywhere there is a loop patch or panel. 
• Available in 3 sizes:
• Small, 3" x 4" (7.62 cm x 10.2 cm)
• Medium, 4" x 6.75" (10.2 cm x 17.8 cm)
• Large, 4" x 8.5" (10.2 cm x 21.6 cm)
• Designed to be used in bags / packs, notebook covers and even apparel.
• The reverse is completely covered with hooks and provides a strong mount.
• #8 YKK zippers with paracord pull.

Our Matroskya pouches are named after the Russian nesting dolls of old and designed for the Recon 9 EVADE, Evade 2.0 and now the new Evade 1.5 backpacks. Each set comes with four differently sized pouches, each nested inside the other.

It is currently available in:

• Black
• Red
• Blue
• Clear PVC

Each pouch has 2 (two) zippered compartments; a vertical in front and a horizontal in the rear.

Each pouch is easily mounted by slotting the top 1" rectangular buckle (what we call a hanger) into any PALS webbing setup (what some call a MOLLE panel) or a d-ring of appropriate size so as to hold it in place.

Dimensions of the largest to smallest as follows:

• 15" x 10.75"
• 12" x 8.75"
• 9.5" x 7.75"
• 7.5" x 5.5"

The largest 2 (two) pouches has 2 (two) hangers and the smallest 2 (two) have only 1 (one) each. These pouches are extremely versatile can be used to hold anything from IFAKs, toiletries to a change of clothing.

Strictly only for the Evade 1.5 and 2.0

• Get your marking equipment super organized with these handy detachable elastic loop patches.
• Designed to hold markers and pens of various sizes. Holds your lip balm too!
• The reverse is completely covered with hook and makes for a very secure mount.
• Available in 2 sizes:
• Small, 3 loops
• Large, 6 loops

Please note that these Kits are loop and hook mounted.

A velcro removable wrap Holster plus three (3) accessory holders. The wrap Holster is made out of two (2) layers of milspec elastic webbing compared to the single layer that is found in other holsters. The accessory holders are also double layered and can hold a variety of items from double magazines (1 each), single stacks (2 in each), flashlights to multi-tools, etc.

The wrap holster is sized to be able to hold everything from BUGs and J-frame revolvers to Government model 1911s. This holster will also fit a full size pistol with a light as shown in one of the photos; a full size M&P with an X300 mounted.

We've also tested the holster to hold other accessories including an external wireless hard drive!

• Hook back organizers in 210D nylon.
• These are 7” W x 4.5” H (17.8 cm x 11.4 cm approx)
• Can be used as a stand-alone, mounted onto a panel of loop.
• A miniaturized version of our standard Type 02

These are our optional padded hip (waist) belts for our top selling Evade backpacks! The hip belts can also be use for other backpacks as long as the mounting or clip-on point is a webbing that is no more than 1.5"

These are produced in both 500D solid nylon, 420D diamond ripstop nylon and 1050D ballistic nylon.

Available in:

• 500D Black, Wolf Gray
• 500D Multicam Black
• 420D Diamond Ripstop Black, Gray and Med Navy
• 1050D Ballistic Nylon Black

Only padded hip belt that uses 6mm sharkskin neoprene to provide the necessary non-slip padding.

Replacement sternum straps incorporating Fidlock's 20mm V-Buckle with pull tab.

Our new Matroskya DEEP pouches are similar in design to the original Matros except these have some additional depth (thickness). These are made out of clear PVC (top) and Mesh (sides & bottom). Because the sides and bottom are made of Mesh there is some flex that allows you to stuff more in each pouch. These work great in the Recon 9 EVADE backpacks but can also be used in other packs/bags that have a loop wall. Each set comes with three (3) differently sized pouches, each nested inside the other.

Unlike the original Matro, each pouch has one (1) zippered compartment; a vertical in front. But these pouches also have two rows of 1.5” hooks that allow you to mount these on loop walls.

Each pouch easily mounts by slotting the top 1" rectangular buckle (what we call a hanger) into any PALS webbing setup (what some call a MOLLE panel) or a d-ring of appropriate size so as to hold it in place.

Dimensions of the largest to smallest as follows:

• 15" x 10.75" x 1.75” D
• 12" x 8.75" x 1.5” D
• 9.5" x 7.75" x 1.5” D

The largest 2 (two) pouches has 2 (two) hangers each while the smallest one has only 1 (one). These pouches are extremely versatile can be used to hold anything from IFAKs, toiletries to a change of clothing.

Strictly only for the Evade 2.0 and the Pathfinder backpacks.

Replacement 3/4” wide side compression straps incorporating WooJin's magnetic Magic Short buckles.

This is a limited edition offering of our Matroksya pouches in X-pac's orange RX25.

Our Matroskya pouches are named after the Russian nesting dolls of old and designed for the Recon 9 EVADE, Evade 2.0 and our award winning Evade 1.5 backpacks. Each set comes with four differently sized pouches, each nested inside the other.

Each pouch has 2 (two) zippered compartments; a vertical in front and a horizontal in the rear.

Each pouch is easily mounted by slotting the top 1" rectangular buckle (what we call a hanger) into any PALS webbing setup (what some call a MOLLE panel) or a d-ring of appropriate size so as to hold it in place.

Dimensions of the largest to smallest as follows:

• 15" x 10.75"
• 12" x 8.75"
• 9.5" x 7.75"
• 7.5" x 5.5"

The largest 2 (two) pouches has 2 (two) hangers and the smallest 2 (two) have only 1 (one) each. These pouches are extremely versatile can be used to hold anything from IFAKs, toiletries to a change of clothing.

For 2022, our new SURGE Tech Pak:

• X42 external fabric
• 210D ripstop inside

This is the new Type 1 organizer that has been specifically designed for the new CHIO-X.

Unlike our previous organizers, this one has hardware on both ends that allows it to be clip onto the corresponding elastic webbing mounts inside the rear zippered pocket of the Chio-X.

To assist with keeping it in place and minimize any gap between the organizer and back wall of this rear pocket, a short strip of hook has been added to hold it in place.

• Material, 210D nylon.
• These are 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx) 

Strictly only for the Spare Camel 2.0 collab

Here's a video on how our beavertail mounts onto our packs.

Our hand-made leather watch rolls are carefully designed to carry 3 watches for your travels. This traditional design lies flat when open, and it rolls up into a compact kit, perfect when packing space is a premium. Simply place your watches in the slots, fold the leather flap over, roll, and secure the roll with the leather cord.

Each roll is hand-stitched and therefore is unique, and can vary slightly in color and dimensions.

FEATURES:

• A combination of Japanese and Italian leather
• Holds 3 x watches, 2 x straps and 1 x watch band spring bar tool
• Fastens with matching leather cord

DIMENSIONS:

• Each roll is 11.75" x 6.75" (300mm x 170mm) when laying flat.
• First watch slot is 2.75" wide (69mm) and the other two are 2.5" wide (65mm)
• Strap slots are 1.5" (37mm)

These are our optional padded hip (waist) belts for our BOGear collaboration Spare Camel 2.0 backpacks!

These are produced in X50 Tactical.